What is “Slide Shaft”?
A shaft that is used at piston rod of hydraulic cylinder or pneumatic cylinder as a guide of straight line motion. Its used at pneumatic and hydraulic machine, construction machinery, molding machine, specially permitted commercial vehicle, several factory automation machine etc.
S45C material |
Specialities and Precision |
Material : S45C ( carbon steel material for machine structuring, JIS G4051)
with hard chrome plated at inner diameter(plating tickness : 20µ)
Plating Hardness : over HV 1000
Outer Diameter tolerance : f8
surface roughness : within 1.6S
Flatness : 0.05/1000~0.1/1000 |
Specification |
 |
Note |
based on your demand, we will cut your ideal rength ,- but please note if you are purchasing with a specified lengths, the end of shaft(within 45mm) would be unapplied plating and plating may be slipped off at end structure because of plating jig.Thank you for your cooperation. |
SUJ2 material |
Specialities and Precision |
Material : SUJ2 (high-carbon-chrome bearing metal material, JIS G4805)
with High frequency tempering
with Hard chrome plating at outer diameter(plating tickness : 5-10µ)
Surface Hardness : HRC60
Outer Diameter tolerance : g6
surface roughness : within 1.6S |
Specification |
 |
Note |
Based on your demand, we will cut your ideal rength |
SUS material |
Specialities and Precision |
Material : SUS304TK (Stainless steel pipe for machine structuring, JIS G3446)
with High frequency tempering
with Hard chrome plating at outer diameter(plating tickness : 10µ)
Surface Hardness : HRC60
Outer Diameter tolerance : f8
inner roughness : within 2.0S |
Specification |
 |
Note |
Based on your demand, we will cut your ideal rength |