What is “Slide Pipe”?
A pipe fits for use at guide pipe and transfer roller. It also attachable for weight saving of piston rod
STKM Material |
Specialities and Precision |
Material : STKM12B-STKM13C(Carbon Steel pipe for machine structuring, JIS G3445 category12, category13)
with hard chrome plated at outer diameter(coating tickness : 20µ)
Outer Diameter tolerance : f8
inside roughness : within 1.6S |
Specification |
 |
Note |
1, we are handling other sizes that is not on above specification table as well.
2, based on your demand, we will cut your ideal rength ,- but please note if you are purchasing with a specified lengths, the end of shaft(within 45mm) would be unapplied plating and plating may be slipped off at end structure because of plating jig.Thank you for your cooperation. |
SUJ2 material |
Specialities and Precision |
Material : SUJ2 (high-carbon-chrome bearing metal material, JIS G4805)
with High frequency tempering
with Hard chrome plating at outer diameter(plating tickness : 5-10µ)
Surface Hardness : HRC60
Outer Diameter tolerance : g6
surface roughness : within 1.6S |
Specification |
 |
Note |
Based on your demand, we will cut your ideal rength |
SUS material |
Specialities and Precision |
Material : SUS304TK (Stainless steel pipe for machine structuring, JIS G3446)
with Hard chrome plating at outer diameter(plating tickness : 10µ)
Outer Diameter tolerance : 0~-0.2
surface roughness : within 2.0S |
Specification |
 |
Note |
Specified lengths : 2,000L and 4,000L
Based on your demand, we will cut your ideal rength |